切削液處理隨著城市化進程的不斷加快，廢液低溫蒸發器運用得越來越普遍，特別是在工業廢水方面，低溫廢水處理設備運行原理及特點是怎么樣的呢？新坤遠環保小編就此問題和大家一起聊一聊。

　　With the continuous acceleration of urbanization, the use of low-temperature evaporators for waste liquid in cutting fluid treatment is becoming increasingly common, especially in industrial wastewater. What are the operating principles and characteristics of low-temperature wastewater treatment equipment? New Kunyuan Environmental Protection Editor would like to discuss this issue with everyone.

　　蒸發器開始是由反應釜，到單效蒸發器，多效蒸發器，MVR蒸發器，以及到現在的低溫蒸發器。適用于切削液、乳化液、清洗劑、電鍍廢水等處理，以提高水質回收率，減少委外處理量，從環保綠色角度保護水資源。

　　The evaporator started from the reaction kettle, to the single effect evaporator, multi effect evaporator, MVR evaporator, and now to the low-temperature evaporator. Suitable for the treatment of cutting fluids, emulsions, cleaning agents, electroplating wastewater, etc., to improve water quality recovery rate, reduce outsourced treatment volume, and protect water resources from an environmental and green perspective.

　　低溫廢水處理設備運行原理及特點，低溫廢水處理設備運行，是將廢水收集至原液罐，由原液罐到中液位后，自動進水，水泵運行產生真空，壓縮機運行產生熱量給蒸發罐內廢水加熱，在真空狀態下，廢水溫度上升到38℃左右，廢水開始蒸發，然后通過蒸發濃縮過程，開始排出濃縮液。以上過程為全自動，不需要人工干涉。

　　The operating principle and characteristics of low-temperature wastewater treatment equipment. The operation of low-temperature wastewater treatment equipment is to collect wastewater into the original liquid tank. After the original liquid tank reaches the medium liquid level, water automatically enters the tank. The water pump generates vacuum, and the compressor generates heat to heat the wastewater in the evaporation tank. In the vacuum state, the wastewater temperature rises to about 38 ℃, and the wastewater begins to evaporate. Then, through the evaporation and concentration process, the concentrated liquid begins to be discharged. The above process is fully automated and does not require manual intervention.

　　科爾低溫廢水處理設備特點如下：（1）環保認證產品，出水水質穩定，占地面積小；（2）可以分離高濃縮廢水中的純水，實現廢水回用；（3）不需要添加藥劑，委外處理處理費用降低；（4）集成化設備，自動化，實現無人值守作業

　　The characteristics of Kohl low-temperature wastewater treatment equipment are as follows: (1) environmentally certified products, stable effluent quality, and small footprint; (2) It can separate pure water from highly concentrated wastewater and achieve wastewater reuse; (3) No need to add chemicals, reduced outsourcing processing costs; (4) Integrated equipment, automation, achieving unmanned operation

　　低溫廢水處理設備對金屬加工而產生的廢液進行低溫蒸發處理,采用物理低溫蒸發（38℃左右）高濃縮倍率。降低廢液中COD成分，處理后的水可達到達標排放，從而減少企業委外處理廢液費用。

　　The low-temperature wastewater treatment equipment performs low-temperature evaporation treatment on the waste liquid generated from metal processing, using physical low-temperature evaporation (around 38 ℃) with high concentration ratio. By reducing the COD component in the waste liquid, the treated water can achieve standard discharge, thereby reducing the cost of outsourcing waste liquid treatment for enterprises.