The price of automatic ultrasonic cleaning machine is usually used in our daily life, which can be seen in various industries. However, as the ultrasonic cleaning machine belongs to machinery, if it is used for a long time, it will break down. What are the common fault determination methods?

1、打開電源指示燈不亮

1. The power on indicator does not work

全自動超聲波清洗機打開電源的話，如果出現指示燈不亮的情況，那么就很可能是保險絲熔斷或者是開關損壞，沒有電源輸進去造成的。

If the indicator light is not on when the automatic ultrasonic cleaning machine is turned on, it is likely that the fuse is blown or the switch is damaged and there is no power input.

                

2、打開電源指示燈亮，無超聲波輸出

2. Turn on the power indicator light, no ultrasonic output

如果出現超聲波清洗機打開電源指示燈亮的情況，但是沒有超聲波輸出，不能夠正常運作，這可能是由于保險絲熔斷造成的，也可能是由于超聲波功能器發生故障造成的，同時也可能會出現換能器連接板松脫造成。

If the power indicator of the ultrasonic cleaning machine is on, but there is no ultrasonic output, it can not operate normally. This may be caused by the fuse fusing, or by the failure of the ultrasonic function device. At the same time, it may also be caused by the looseness of the connecting plate of the converter.

超聲波清洗機在使用過程當中都會出現很多故障，一旦出現故障，我們要及時判定故障的原因，這樣一來才能夠針對性的進行維修。

Ultrasonic cleaning machine in the process of using will appear a lot of faults, once there is a fault, we have to determine the cause of the fault in time, so that we can be targeted maintenance.

以上就是關于全自動超聲波清洗機常見故障的判定方法，希望對大家有所幫助，如想了解更多資訊內容請多多關注我們的官網。

The above is about the automatic ultrasonic cleaning machine common fault judgment method, hope to help you, if you want to know more information content, please pay more attention to our official website.