超聲波清洗+鼓泡沖洗
Ultrasonic cleaning+bubble washing
內槽尺寸：750*1200*500
Inner groove size: 750 * 1200 * 500
內槽容量：451L
Inner tank capacity: 451L
內槽材質：SUS304L
Inner groove material: SUS304L
一、超聲波清洗
1、 Ultrasonic cleaning
1、超聲波頻率：40KHz；超聲波功率：0-4800W可調。
1. Ultrasonic frequency: 40KHz; Ultrasonic power: 0-4800W adjustable.
2、清洗加熱：6000W；304不銹鋼加熱管；溫度在RT～95℃可調。
2. Cleaning and heating: 6000W; 304 stainless steel heating pipe; The temperature is adjustable from RT to 95 ℃.
3、采用工業級換能器，底部安裝震板，方便維修與保養。
3. Industrial transducer is adopted, and shock plate is installed at the bottom, which is convenient for repair and maintenance.
4、電導率檢測水質；低液位保護；溢流直排。
4. Conductivity detection of water quality; Low level protection; Direct discharge of overflow.

二、鼓泡沖洗
2、 Bubbling rinse
1、槽體底部裝有鼓泡管，連接自有氣源。
1. The bottom of the tank is equipped with a bubbling tube, which is connected with its own gas source.
2、配加調壓閥門，壓力可調。
2. Equipped with pressure regulating valve, the pressure is adjustable.
3、氣體攪拌系統上安裝電磁閥，并通過控制系統設定時間。
3. A solenoid valve is installed on the gas mixing system and the time is set by the control system.
清洗槽配置過濾循環系統，可實現清洗液體可持續循環利用，降低清洗液體更換頻次，節省清洗成本。
The cleaning tank is equipped with a filtration circulation system, which can realize the sustainable recycling of cleaning liquid, reduce the frequency of cleaning liquid replacement and save cleaning costs.
第二槽：高壓噴淋
The second tank: high-pressure spray
內槽尺寸：750*1200*500MM
Inner slot size: 750 * 1200 * 500MM
內槽容量：450L
Inner tank capacity: 450L
材質：sus304L
Material: sus304L
槽體裝有PU噴淋管道，能夠實現內部四周對工件進行高壓噴淋沖洗，可使超聲波清洗過后殘留在工件表面的污漬再次沖刷下來。
The tank body is equipped with PU spray pipes, which can realize high-pressure spray washing of the workpiece around the inside, and can wash the stains left on the surface of the workpiece after ultrasonic cleaning again.
2、噴淋壓力大于0.5MPA，壓力可調節。
2. The spray pressure is greater than 0.5MPA, and the pressure is adjustable.
3、噴淋功能與槽體蓋互鎖，關閉蓋子后噴淋才能正常工作。
3. The spray function is interlocked with the tank cover. The spray can work normally only after the cover is closed.
4、配手動噴槍。
4. Equipped with manual spray gun.
第三槽：風切吹水
The third slot: wind cutting and water blowing
內槽尺寸：750*1200*500MM
Inner slot size: 750 * 1200 * 500MM
內槽容量：450L
Inner tank capacity: 450L
內槽材質：sus304L
Inner groove material: sus304L
1、槽體四周固定風切管，接氣體吹水，快速將工件表面的大顆粒水珠吹落。
1. The air cutting pipe is fixed around the tank body and connected with gas to blow water to quickly blow off the large particles of water on the surface of the workpiece.
2、吹風時風管旋轉90°吹掃，風切管可調角度。
2. When blowing, the air pipe rotates 90 ° to purge, and the angle of air cutting pipe can be adjusted.
3、配一把手持氣槍，可選擇手動吹。
3. Equipped with a hand-held air gun, you can choose to blow manually.
三槽半自動超聲波清洗機設備手動平移裝置：
Manual translation device of three-slot semi-automatic ultrasonic cleaning machine:
組成：氣缸+手動移動小車+氣路+電磁閥
Composition: air cylinder+manual mobile trolley+air circuit+solenoid valve
采用SUS304不銹鋼支架，在支架安裝移動小車，帶氣動升降機構，可以通過很小力手動移動工件位置，使用者操作更方便省力。
SUS304 stainless steel bracket is adopted. A mobile car is installed on the bracket with a pneumatic lifting mechanism. The workpiece position can be moved manually with a small force, which is more convenient and labor-saving for users.
感謝您的閱讀，此文的文章來源：超聲波清洗機更多的內容和問題請點擊：http://www.pvc-powder.com我們會繼續努力的為您提供服務，感謝您的支持！
Thank you for reading. The source of this article is: Ultrasonic cleaning machine. For more information and questions, please click: http://www.pvc-powder.com We will continue to work hard to provide you with services. Thank you for your support!